{"id":186,"date":"2019-04-08T17:33:09","date_gmt":"2019-04-08T09:33:09","guid":{"rendered":"https:\/\/www.pcstationcn.com\/blog\/?p=186"},"modified":"2019-04-08T17:33:09","modified_gmt":"2019-04-08T09:33:09","slug":"power-indicator-light-is-on-but-display-nothing-after-eglobal-mini-computerinstall-ram-and-ssd-well-connect-with-power-adapter","status":"publish","type":"post","link":"https:\/\/www.pcstationcn.com\/blog\/?p=186","title":{"rendered":"Power indicator light is on but display nothing after Eglobal mini computer(install RAM and SSD well) connect with power adapter"},"content":{"rendered":"\n<p>1. Make sure the VGA Cable\/HDMI cable between\nthe PC and display is well connected.<\/p>\n\n\n\n<p>2. If that doesn\u2019t work, change a\nVGA\/HDMI cable for trial.<\/p>\n\n\n\n<p>3. Make sure the memory you use is the same kind as per Eglobal\nmini computer requirement.<\/p>\n\n\n\n<p>4. Close the power and try to open the mini computer case carefully, check if the memory plugged correct or loose, unplug the memory and wipe it up by nonwovens then insert it on the mini computer, connect power adapter and re-start it.<\/p>\n\n\n\n<p>5. sometimes the problem\ncomes due to CMOS battery problem, the CMOS battery remember some error\ninformation and make the computer no display, you can remove and try it again.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"486\" height=\"305\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-3.png\" alt=\"\" class=\"wp-image-187\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-3.png 486w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-3-300x188.png 300w\" sizes=\"(max-width: 486px) 85vw, 486px\" \/><\/figure>\n\n\n\n<ul><li><\/li><\/ul>\n\n\n\n<p>If your computer is losing\nits time or date settings, or you are receiving a message CMOS Read Error, CMOS\nchecksum error, or CMOS Battery Failure, or lost display, for example, some\nusers using Eglobal mini computer and find all indicator shows correct, RAM\nalso correctly plugged in, but totally no display, it may due to the CMOS\nproblem, it remember some error and shows nothing on hardware, you will need to\nremove your CMOS battery and try it again.<\/p>\n\n\n\n<figure class=\"wp-block-image is-resized\"><img decoding=\"async\" loading=\"lazy\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/2-2.jpg\" alt=\"\" class=\"wp-image-188\" width=\"496\" height=\"496\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/2-2.jpg 304w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/2-2-150x150.jpg 150w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/2-2-300x300.jpg 300w\" sizes=\"(max-width: 496px) 85vw, 496px\" \/><\/figure>\n\n\n\n<p>Before opening your\ncomputer, make sure you are aware of ESD and its dangers: ElectroStatic\nDischarge, ESD is one of the few things you can do to damage or destroy your\ncomputer or parts of your computer. Much like the shock you receive when\nrubbing your feet on the carpet and touching something metal, ESD can occur\nwhen working in your computer and can cause components you touch to no longer\nwork properly. ESD can occur without the user feeling a shock and only occurs\nwhile working on the inside of the computer or handling an expansion card or\nother hardware. The best method of preventing ESD is to use an ESD wrist strap,\ngrounding mat, or grounding workbench. However, because most users do not have\naccess to such items, we have included the steps below to help reduce the\nchances of ESD as much as possible.<\/p>\n\n\n\n<p>For our mini pc, after\nremove the CMOS battery, you can plug power adapter and turn on the mini pc\nagain, this time it will shows normally and confirms the computer has no\nhardware problem. After that, power it off and remove power plug, then put the\nCMOS battery back again, after CMOS battery back work, everything will runs\nnormal now.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>1. Make sure the VGA Cable\/HDMI cable between the PC and display is well connected. 2. If that doesn\u2019t work, change a VGA\/HDMI cable for trial. 3. Make sure the memory you use is the same kind as per Eglobal mini computer requirement. 4. Close the power and try to open the mini computer case &hellip; <a href=\"https:\/\/www.pcstationcn.com\/blog\/?p=186\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Power indicator light is on but display nothing after Eglobal mini computer(install RAM and SSD well) connect with power adapter&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[],"_links":{"self":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/186"}],"collection":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=186"}],"version-history":[{"count":1,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/186\/revisions"}],"predecessor-version":[{"id":189,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/186\/revisions\/189"}],"wp:attachment":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=186"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=186"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=186"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}