{"id":209,"date":"2019-04-11T17:12:37","date_gmt":"2019-04-11T09:12:37","guid":{"rendered":"https:\/\/www.pcstationcn.com\/blog\/?p=209"},"modified":"2019-04-11T17:53:56","modified_gmt":"2019-04-11T09:53:56","slug":"the-difference-with-rs232-rs485-rs422-com-port-in-eglobal-mini-pc","status":"publish","type":"post","link":"https:\/\/www.pcstationcn.com\/blog\/?p=209","title":{"rendered":"The Difference with RS232\/RS485\/RS422 COM Port on the Eglobal Mini PC"},"content":{"rendered":"\n<p>RS232 is a\nstandard interface, which is a D-shaped 9-pin. The signal definition of the\ninterface of the connected device is the same. The RS422\/RS485 is a\nnon-standard interface, generally a 15-pin serial interface (also a 9-pin\ninterface), and the pin definition of each device is different. RS232 is a\n4-wire system with full duplex mode. RS485 is a two-wire system with\nhalf-duplex mode.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"600\" height=\"243\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-2.jpg\" alt=\"\" class=\"wp-image-210\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-2.jpg 600w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-2-300x122.jpg 300w\" sizes=\"(max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 984px) 61vw, (max-width: 1362px) 45vw, 600px\" \/><\/figure>\n\n\n\n<p>RS232 is designed\nfor point-to-point communication (that is, using only a pair of receiving and\ntransmitting devices). The driver load is 3~7k\u03a9. Therefore, RS232 is suitable\nfor communication between local devices. 422 and 485 serial interface\nstandards, RS232 and RS422\/RS485 are different. The data signal adopts\ndifferential transmission mode, also called balanced transmission. It uses a\nbunch of twisted pairs. In the early PC communication, the maximum transmission\ndistance of RS422 is more common. 4000 feet with a maximum transfer rate of 10\nMb\/s.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"600\" height=\"421\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/2-5.jpg\" alt=\"\" class=\"wp-image-211\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/2-5.jpg 600w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/2-5-300x211.jpg 300w\" sizes=\"(max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 984px) 61vw, (max-width: 1362px) 45vw, 600px\" \/><\/figure>\n\n\n\n<p>The basic knowledge of RS232\ncommunication: RS232 communication is also called serial communication mode. It\nrefers to the way that the computer uses the serial port cable and the single\ndevice (controller) to communicate through the RS232 international standard\nprotocol.<\/p>\n\n\n\n<p>Communication distance: 9600 baud\nis recommended within 13 meters.<\/p>\n\n\n\n<p>Communication rate (baud rate):\nThe default is 9600 bps, and the common ones are 1200 2400 4800 19200 38400.\nThe larger the baud rate, the faster the transmission speed, but the shorter\nthe stable transmission distance, the worse the anti-interference ability.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"600\" height=\"243\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/3-2.jpg\" alt=\"\" class=\"wp-image-212\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/3-2.jpg 600w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/3-2-300x122.jpg 300w\" sizes=\"(max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 984px) 61vw, (max-width: 1362px) 45vw, 600px\" \/><\/figure>\n\n\n\n<p>The basic knowledge of RS485\ncommunication: The basic communication mechanism of RS485 and RS232 is the\nsame. His advantage is that it makes up for the shortcoming of RS232\ncommunication distance and can not carry out network management of multiple\ndevices at the same time.<\/p>\n\n\n\n<p>The computer connects multiple 485\ndevices (access controllers) in turn through the RS232 RS485 converter, and\npolls the devices on the bus in turn.<\/p>\n\n\n\n<p>The wiring label is 485+ 485-,\nwhich corresponds to 485+ 485- of the link device (controller).<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"600\" height=\"436\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/4-2.jpg\" alt=\"\" class=\"wp-image-213\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/4-2.jpg 600w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/4-2-300x218.jpg 300w\" sizes=\"(max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 984px) 61vw, (max-width: 1362px) 45vw, 600px\" \/><\/figure>\n\n\n\n<p>RS422 has longer distance and faster transmission rate than RS232 transmission. The transmission rate is up to 10Mbit\/s. At this rate, the cable length is 120 meters. If the transmission rate is lower, such as 9000 baud rate, the maximum distance can reach 1200 meters. .<\/p>\n\n\n\n<p>RS422 uses two signal lines per channel, if one is in a logic &#8220;1&#8221; state and the other is a logic &#8220;0&#8221;. The circuit consists of a transmitter, a balanced connection cable, a cable termination load, and a receiver. It is stipulated in the circuit that there is only one transmitter and there are multiple receivers, so the point-to-point communication method is usually adopted.<\/p>\n\n\n\n<p>Basic knowledge of RS422 communication:\nHis communication principle is similar to RS485. The difference is that his bus\nis two sets of twisted pairs (4 lines), which are respectively labeled as R+ R-\nT+ T-. The disadvantage is that the wiring cost is high and it is easy to make mistakes.\nIt is used less now.<\/p>\n\n\n\n<p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nBecause\nRS232 COM port is universal, Most of Eglobal Industrial Mini Computer is with\nthe RS232 COM port like the following pictures shown. The Mini PC can support\nthe adapter RS232 to RS422\/485 if you need the RS422 or RS485 port. \n\n\n\n<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"900\" height=\"551\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/6-1.png\" alt=\"\" class=\"wp-image-217\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/6-1.png 900w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/6-1-300x184.png 300w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/6-1-768x470.png 768w\" sizes=\"(max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 1362px) 62vw, 840px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"737\" height=\"584\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-4.png\" alt=\"\" class=\"wp-image-206\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-4.png 737w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/1-4-300x238.png 300w\" sizes=\"(max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 984px) 61vw, (max-width: 1362px) 45vw, 600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" loading=\"lazy\" width=\"644\" height=\"549\" src=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/7.png\" alt=\"\" class=\"wp-image-218\" srcset=\"https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/7.png 644w, https:\/\/www.pcstationcn.com\/blog\/wp-content\/uploads\/2019\/04\/7-300x256.png 300w\" sizes=\"(max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 984px) 61vw, (max-width: 1362px) 45vw, 600px\" \/><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>RS232 is a standard interface, which is a D-shaped 9-pin. The signal definition of the interface of the connected device is the same. The RS422\/RS485 is a non-standard interface, generally a 15-pin serial interface (also a 9-pin interface), and the pin definition of each device is different. RS232 is a 4-wire system with full duplex &hellip; <a href=\"https:\/\/www.pcstationcn.com\/blog\/?p=209\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;The Difference with RS232\/RS485\/RS422 COM Port on the Eglobal Mini PC&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[1],"tags":[],"_links":{"self":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/209"}],"collection":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=209"}],"version-history":[{"count":2,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/209\/revisions"}],"predecessor-version":[{"id":219,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/209\/revisions\/219"}],"wp:attachment":[{"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=209"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=209"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.pcstationcn.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=209"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}