Category: EGLOBAL Mini PC

EGLOBAL Mini PC

How to make the Eglobal Mini Computer V310 support Auto Power on Function

How to make the Eglobal Mini Computer V310 model support Auto Power on Function? Please refer to the following steps.

Step 1. Preparing one set Eglobal V310 model mini computer and the screwdriver.

Step 2. Use the screwdriver open the bottom plate and upper plate.

Step 3. Find the power switch button. There is a three-pin pin next to the power button. There is a jumper connected to the two pins on the left.

Step 4. Pull out the jumper cap and connect the two pins on the right. as the picture shows.

New Launched CPU i7 10510U Mini Computer

We’ve been waiting for Intel 10th Generation Comet Lake Mini PC for a long time, In 2020, finally it launched. Eglobal Mini PC CPU always follows the latest Intel processors and meet the latest market requirement
We have made two different series mini pc for this latest CPU, one is our V7 series Fanless mini pc. Another one is our V310 series Mini PC with Cooling fan, the size only 150*137*48mm
U can see the following picture for the two different series :

For the performance, The new launched 10th i7 10510U is performed better more than the 8th i7 8565U, u can see the difference from the below pictures:

The two series Mini PC both support big memory capacity, dual DDR4 memory slot up to 64GB RAM, and there is m.2 NVME SSD storage up to 1TB, and also one 2.5 inch HDD storage up to 5TB available, building windows 7 or windows 10 or Linux system on the SSD, and use HDD for file saving, get fast speed and huge capacity meantime.
Welcome u to inquiry about this NEW CPU Mini PC.

NVMe vs. M.2 vs. SATA – What’s the Difference?

First, a quick note about SSDs – they’re fast. So fast in fact, their limiting factor is not their own hardware, but rather the SATA III connection that hard drives have traditionally used. Enter NVMe. Standing for “Non-Volatile Memory Express,” NVMe is an open standard developed to allow modern SSDs to operate at the read/write speeds their flash memory is capable of. Essentially, it allows flash memory to operate as an SSD directly through the PCIe interface rather than going through SATA and being limited by the slower SATA speeds.  Put another way, it’s a description of the bus the component uses to communicate with the PC, not a new type of flash memory. It is also unrelated to the form factor, which is why NVMe drives can come in both M.2 or PCIe card form factors. With both form factors, the component is connecting electrically to the PC via PCIe rather than SATA. Yes, it’s confusing, but stick with us.

When you buy a new SSD, it uses either the SATA or NVMe interface to connect to your computer. Traditional SATA SSDs use the 2.5″ form factor, as seen in the picture below.

What is M.2?

M.2 is a form factor that spells out the physical size and shape of the card that can be plugged into an M.2 slot. This form factor has been designed to maximize space while minimizing the footprint. The M.2 slot is rectangular, with possible widths of 12, 16, 22, or 30 millimeters. Most M.2 solid-state drives are 22 millimeters wide. Lengths can also vary: 16, 26, 30, 38, 42, 60, 80, or 110 millimeters.

Most computer motherboards accommodate a variety of lengths for M.2 slots. At the same time, the width tends to be fixed on each motherboard, usually 22 millimeters wide. The M.2 slots on a motherboard can communicate with the rest of the PC using different interfaces/standards, including PCI Express (used by NVMe) or SATA, used by traditional SSDs.

Each motherboard has a different number of M.2 slots with different specifications.

How to install the 2.5” SATA HDD/SSD in to the Eglobal Mini Computer M8-N3160

Step 1: Prepare the 2.5” SATA HDD/SSD, SATA cable, power supply cable, screwdriver(M3) and the mini pc M8-N3160.

Step 2: Connect the SATA cable and power suplly cable to the motherboard for stand-by.

Step 3: Remove the bracket for installing the HDD/SSD for stand-by.

Step 4: Install the HDD/SSD to the bracket and fix the HDD/SSD to the bottom cover of the chassis.

Step 5: Connect the HDD/SSD to the motherboard by the SATA cable.

Step 6: Fix the bottom cover to the case.

EGLOBAL Mini Computer M3_2955U_5005_4500 s5 RTC wake settings

1.On boot up of the computer. Tap the ESC button repeatedly until you see this screen pop up.

2. Hit the right arrow key one time to end up here at the “Advanced” screen

3. On the screen you can see the S5 RTC  wake settings , Press “Enter”,you will see the screen pop up

4. You can set the time you want the pc start boot

5. When you finshed the setting, pls press F10 to save the settings.

EGLOBAL Mini Computer M3-2955U Bios Update for AC Power Option

  • On boot up of the Facility Controller. Tap the Delete button repeatedly until you see this screen pop up.
  • Hit the right arrow key twice to end up here at the “Chipset” screen
  • On this screen hit the down arrow to highlight “PCH-IO Configuration”
  • Once “PCH-IO Configuration” is highlighted, hit enter to select it.
  • You will show up at this screen
  • Move down until you highlight the setting for “Restore AC Power Loss”
  • Hit enter once it is highlighted and then select “Power On”
  • Now hit escape to back out of the “Chipset” menu
  • Hit the right arrow three times to move over to the “Save & Exit” screen
  • Hit enter on the first highlighted item: “Save Changes and Exit”

Simplified instructions:

  1. Delete (Repeatedly)
  2. Right
  3. Right
  4. Down
  5. Enter
  6. Up
  7. Up
  8. Enter
  9. Down
  10. Enter
  11. Escape
  12. Right
  13. Right
  14. Right
  15. Enter
  16. Enter

How to set up multiple monitors on Windows 10 with Eglobal Mini PC

Are you getting into a dual or triple-monitor setup? Here are the best tips to configure all the displays without third-party software on Windows 10.

Before configuring a multi-monitor setup

Before diving into this guide, make sure that all the necessary cables are connected to the monitors and computer. This includes connecting power and video signal using VGA, DVI, HDMI, or DisplayPort (recommended) cables.

If you’re not sure, you can always note the make and model of the monitor, and search online for the manufacturer manual to get a better idea on how to connect the display.

How to rearrange multiple displays on Windows 10

Although you can connect a monitor to any of the available video ports on the graphics card, when setting up a dual-monitor or triple-monitor setup, it’s easy to plug them in the wrong order. While they will still work, you may run into issues using the mouse and running applications until you rearrange them correctly.

To rearrange monitors on Windows 10, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click on Display.
  4. Under the “Select and rearrange displays” section, drag and drop each display to rearrange them according to their physical layout on your desktop.

Quick tip: When rearranging monitors in the Display settings page, make sure that all monitors align at the top perfectly. Otherwise, you’ll have problems moving the mouse cursor between monitors from the corners.

5. Click the Apply button.

Once you complete the steps, Windows 10 will understand the physical layout of the screens, and you’ll be able to work across each display and run apps without issues.

If you’re not sure which monitor you’re selecting, click the Identify button to figure out. If one of the monitors isn’t showing up, make sure it’s receiving power and connected correctly, and click the Detect button. In the case that you’re still having problems, reset their connections (or restart your computer), and try the Detect button again.