If you have Eglobal Mini PC with one SIM card slot on the motherboard and would like to use 4G WiFi, welcome to read this article about how to install 4G module taking Eglobal Industrial Mini PC G4 for example.
The Eglobal Industrial Mini Computer G4 with Intel Core i5-8250u processor onboard, Intel UHD Graphics 620, Rich interfaces: dual Intel Gigabit LAN, 2 x COM ports, can change to RS232/422/485 from BIOS, 1 x VGA, 1 x HDMI, 4 x USB2.0, 4 x USB3.0, 1 x GPIO, 1 x MIC, 1 x SPK, 1 x Reset, 1 x CMOS clear button, 1 x 2Pin Phoenix terminal power supply input, 1 x SIM card slot. The Industrial Mini PC outside has one SIM card slot with push function and there is one Mini-PCIE slot supporting 4G module on the motherboard. How to install 4G module on the Eglobal Industrial Mini PC G4?
Step 1, you shall preprare these things: one SIM card, one 4G module for your local 4G communication, one Eglobal Mini PC like G4 model.
Step 2, push the SIM card into the SIM card slot.
Step 3, open the baseplate of Mini PC G4, find the Mini-PCIE slot for 4G module, then install it and fix by one screw using screwdriver.
Step 4, connect two small RF cables with 4G module, and install dual external wireless antennas into the two WiFi holes.
Step 5, cover the backside of the mini pc, connect to power supply, mouse, keyboard and monitor, turn on the mini pc.
Step 6, the mini pc will connect the local 4G WiFi automatically shown in the video.
If disconnection it shows message and require us adding an APN network, click the wifi button on the bottom right corner, you can see “Network&Internet settings” and go to “Settings”, click “Cellular”, click “Add an APN”, go to APN window, and input the information(anything ok), click ” Save”, then the APN wifi available, click it to connect to 4G wifi.
Details or BUY via the link: https://bit.ly/337oM6F
