Author: admin

How to setup RTC function for Eglobal mini pc M9-J1900?

Step 1: Restart your mini pc, and then repeatedly press “DELETE”, into the BIOS.

Step 2: Choose the Chipset, find the “Intel RC ACPI Settings”

Step 3: Into the “Intel RC ACPI Settings” , choose the “PCH-IO”Configuration”

Step 4: Find the “State After G3”, choose the “SO State”.

Step 5: Save your configuration and exit.

If you don’t know how to setup the RTC fuction for M9, you may refer our video:

How to solve the problem that the Mini PC’s BIOS is Locked Down?

Method 1: Unplug the main unit power cord, then remove the chassis and remove the BIOS battery for a few minutes before installing it.

Note: The miniPC power cord must be unplugged, otherwise there is a big chance that it will not be removed.

Method 2: Pull the miniPC power cord and then remove the chassis to find a three-pin jumper near the BIOS battery. It should be inserted above 1, 2 and jump to 2, 3 for 10 seconds.

Note: The miniPC power cord must be unplugged, otherwise the current loop will destroy the BIOS. The jumper was originally a short circuit.

DELL brand host BIOS crack method: Pull the host power cord and then remove the chassis to find the jumper near the BIOS battery. The jumper below writes the password label to pull out the jumper, wait for more than ten seconds and then plug it back. . You can clear the BIOS password.

Note: This method is not only suitable for DELL hosts, because there are many motherboards with the same settings. Only DELL is more commonly used in this method. Previous IBM also liked it, and now like the fourth step.

Lenovo and other brand host BIOS crack method: pull the host power cord and then remove the chassis to find a jumper near the BIOS battery. The jumper below writes the COMS label and pulls out the jumper. Wait for more than ten seconds. go back. You can clear the BIOS password.

How To Setup the PXE Function From Eglobal Mini PC V7-8565U?

Setp 1: Step 1: Press On/Off Switch on the mini pc and then keep press “Esc” on the keyboard until goes into BIOS;

Or

Press “ F11 ” after booting, select “ Enter Setup ”  into BIOS interface as the picture shown:

Step2:  Into the “Advanced”, find the “Network Stack Configuration”.

Step 3: Make all the select become Enabled.

Step 4: After the previous step is completed, return to “Advanced”, into the “CSM Configuration”

Step 5: Find the “Network” choose the “Legacy”.

How to make the Eglobal V310 fan mini pc hang behind the monitor

Step1: Have a monitor, a V310 mini pc and four screws ready. Previously, our computer needed a VESA after hanging it on the monitor. Now we can hang it directly behind the monitor without the VESA.

Step2: Screw the screw into the bolt behind the monitor.

Step3: Select the appropriate hanger according to the distance of the bolt.

If you don’t know how to do, please refer to the video.

Details or BUY via the link: https://www.pcstationcn.com/free-shipping-eglobal-mini-pcs/Desktop-pc

How to install 4G module on the Eglobal Industrial Mini PC G4?

If you have Eglobal Mini PC with one SIM card slot on the motherboard and would like to use 4G WiFi, welcome to read this article about how to install 4G module taking Eglobal Industrial Mini PC G4 for example.

The Eglobal Industrial Mini Computer G4 with Intel Core i5-8250u processor onboard, Intel UHD Graphics 620, Rich interfaces: dual Intel Gigabit LAN, 2 x COM ports, can change to RS232/422/485 from BIOS, 1 x VGA, 1 x HDMI, 4 x USB2.0, 4 x USB3.0, 1 x GPIO, 1 x MIC, 1 x SPK, 1 x Reset, 1 x CMOS clear button, 1 x 2Pin Phoenix terminal power supply input, 1 x SIM card slot. The Industrial Mini PC outside has one SIM card slot with push function and there is one Mini-PCIE slot supporting 4G module on the motherboard. How to install 4G module on the Eglobal Industrial Mini PC G4?

Step 1, you shall preprare these things: one SIM card, one 4G module for your local 4G communication, one Eglobal Mini PC like G4 model.

Step 2, push the SIM card into the SIM card slot.

Step 3, open the baseplate of Mini PC G4, find the Mini-PCIE slot for 4G module, then install it and fix by one screw using screwdriver.

Step 4, connect two small RF cables with 4G module, and install dual external wireless antennas into the two WiFi holes.

Step 5, cover the backside of the mini pc, connect to power supply, mouse, keyboard and monitor, turn on the mini pc.

Step 6, the mini pc will connect the local 4G WiFi automatically shown in the video.

If disconnection it shows message and require us adding an APN network, click the wifi button on the bottom right corner, you can see “Network&Internet settings” and go to “Settings”, click “Cellular”, click “Add an APN”, go to APN window, and input the information(anything ok), click ” Save”, then the APN wifi available, click it to connect to 4G wifi.

Details or BUY via the link: https://bit.ly/337oM6F

How to install the 1037U system using the USB driver

Step 1: Make a bootable flash usb driver as the following pictures

Install the software “make bootable USB software.exe ” on your computer, then open it to make the bootable flash usb driver.

The important step: Copy the xp.gho to the usb dirver

Step 2: Use your UBS driver into the PE system

Put your USB driver on your mini pc that you want to re-install the system, then turn on your mini pc and press “F11” then you will see the picture:

Select your USB Driver like “SinDisk Curzer Edge 1.27” then press “Enter”

Re-start your computer after above steps finished.

Introduction – Golden OEM & ODM Mini PC Manufacturer “EGLOBAL” in Shenzhen City, China

Eglobal Technology Co Ltd(HK Company), established in 2009 in Hong Kong, is a high-tech company in line with latest computer technical, is also a professional manufacturer and exporter that is concerned with the design, development and production of Mini PCs. At the beginning of our company, we devote into thin client pc station, in 2011 we expand our business field into Mini PCs development and supplying, especially fanless system without cooling fan. We are located in Shenzhen City, Guangdong Province, with high-speed developed economy, preferential policies local government support and convenient transportation access. And with our deeply-accumulated experience and knowledge of oversea marketing sales team in Eglobal international trade department and 7 technical support team with 10 years computer support experience we wish to become one of your best supplier. 


We create own brand “EGLOBAL” with high quality, competitive price, excellent sales team and nice after-sales support, quickly get big worldwide market, market includes Latin America, Asia, Africa and some European countries. In 2016, EGLOBAL as Gold Sellers is Top-Quality Brands on AliExpress, our Sales ranked eighth in Computer & Office catalog, second only to Samsung. Since now a monthly sales reached USD200000 by the official store here. EGLOBAL on AliExpress: https://eglobal.aliexpress.com/store/217312
 
Shenzhen Eglobal Import&Export CO., Limited(CN Company), established in 2012, cooperated with Alibaba to expand our market all over the world. EGLOBAL on Alibaba: http://eglobal.en.alibaba.com/. As our company’s development, we shall expand our sales team then open a new Alibaba in 2017: https://eglobalminipc.en.alibaba.com/ .
 
In order to make us become stronger, we provide Drop Shipping service all over the world branded EGLOBAL and we also supply wholesale OEM & ODM service, including designing and printing customer outside color package, build in customer logo into our software along with the hardware, produce customer designed product shape and so on.

Details about us please kindly copy the video on YouTube: https://youtu.be/vvoKfOfgzz8 .

Welcome to subscribe to ” Eglobal Technology Co., Limited ” on YouTube or Facebook.

Video – How to assemble EGLOBAL Fanless Mini PC M3 serial

Usually we assemble a complete Mini PC well for our customers, but a few customers ask us to send bulk packaging to them in order to avoid high customs tax at local. If you don’t know how to assemble welcome to copy the demonstration video link of EGLOBAL Mini PC M3 serial for your reference.

Step 1: https://youtu.be/FxlMGwR17jE

Apply a few thermal grease between heat sink and motherboard is an important step. Fix the motherboard on the EGLOBAL Mini PC case by screws.

Step 2: https://youtu.be/3nNzaCkLKzQ

Fix the motherboard on the EGLOBAL Mini PC case by screws and install the case frame well.

Step 3: https://youtu.be/tyf12_XIFg8

Install the WiFi RF cables, you shall use the WiFi washer and WiFi screws to fix the two external WiFi antennas.

Step 4: https://youtu.be/PO3F9W68klU

Install the WiFi module, RAM and Storage on the correct slot of this motherboard.